Foxconn 760GXK8MC Manual page 13

This motherboard supports AMD Athlon
HyperThansport TM Technology.
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
For the detailed CPU vendor list qualified on this motherboard, please visit
the website: http://www.foxconnchannel.com
Installation of CPU
Follow these steps to install the CPU.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Chapter 2 Installation Instructions
TM 64 and Sempron TM
o
Push down the socket
Cut edge
lever to secure the CPU.
processors with
Gap in the base
7