Table of Contents
Advertisement
Diverse 5410 user guide
The incoming caller's number is
not displayed even though you
have Caller Display.
The handset or base station does
not ring.
You keep hearing the error beep
(a descending tone).
Voice dialling does not work.
The other caller cannot hear me.
22/8/03
10:15 AM
The caller's number has been
withheld.
The ringer has been switched off.
Call Diversion has been set to
All Calls
You have pressed the wrong
button in a sequence.
You may be speaking too far
away from the handset.
There may have been too much
background noise when recording
the Voice dialling name.
You may have pressed the INT
button and muted the handset.
BT Diverse Helpline – 08457 908 070
Page 63
g
Caller has to allow their number to
be sent.
Switch the ringer back on.
See page 46.
Switch off Call Diversion, see page 39.
Check the prompts in the display
or refer to instructions in the
user guide.
Move to within 20cm of the handset
microphone.
Record your Voice dialling name in
quiet surroundings.
Press the RETURN display button.
63
Advertisement
Table of Contents
