Table of Contents
Advertisement
Diverse 5410 user guide
If all internal numbers have been
assigned then the internal number
6 will be re-assigned.
To manually register a BT
Diverse 5400 handset to
another base station.
If you want to register your
handset to another base station
you will need to manually
register it.
On the handset to be registered:
Press MENU.
MENU
Scroll DOWN to
H/set Settings .
Press OK.
OK
Scroll DOWN to
Register Handset .
Press OK.
OK
Enter the system PIN.
(Original setting
Press OK.
OK
If the base station is a
BT Diverse 5410, press the
PAGE button until you hear
PAGE
a beep – after approximately
three seconds.
22/8/03
10:15 AM
Note
0000 ).
BT Diverse Helpline – 08457 908 070
Page 57
g
After approximately one
minute the handset will display
its internal number. The
handset is now registered and
the handset display will return
to the idle screen.
If the base is not a 5410 you
will need to follow the user
guide for the base station you
are registering the 5400
handset to.
Note
To make internal calls or page
handsets, see page 18.
To register BT Diverse
2000/3000/4000 series
handsets and other makes
Providing your handset is
GAP (Generic Access Profile)
compliant, you can register it
to your BT Diverse 5410 base.
Place your handset into
registration mode according to
the instructions in its user guide.
When the handset is in
registration mode, you will
need to:
Press the PAGE button located
on the top of your BT Diverse
5410 base station until there is
a beep after approximately
three seconds.
57
Advertisement
Table of Contents
