Assembly; Board, Vf Holder Assembly; Eye Cup Assembly - Sony DCR-PC100 Service Manual

2-8. CCD/CD BLOCK ASSEMBLY, MF RING BLOCK ASSEMBLY
1 Tapping screw
(M1.7 × 4)
[REMOVING THE
MF RING BLOCK ASSEMBLY]
1 Tapping screw (M1.7 × 4)
3 Remove the claw
2 Remove the two claws
4 MF ring block

assembly

2-9. VF-138 BOARD, VF HOLDER ASSEMBLY, EYE CUP ASSEMBLY
qd LCD cushion (1)
qs LCD (LCX027AK-J)
q; VF holder lid
8 Cushion (3)
5 Light guide plate
block (6P)
2 Remove the
three claws
1 VF blind sheet
3 Flexible board
(from lens device) (33P)
2 CD heat sink/
CD insulating sheet/
CD heat transfer sheet
qa Lens device
(LSV-660A)
Be careful not to damage the
flexible board to be removed
at step 3 .
qf VF holder assembly
6 LCD (LCX027AK-J)
(16P)
qa Cushion (2)
9 Remove the
four claws
4 Remove the
two claws
7 VF-138 board
3 Remove the
four claws
4 Tapping screw
(M1.7 × 4)
7 Seal rubber (W)
8 Optical filter block
9 Two tapping
screws (M1.7 × 4)
q; Lens frame
[REMOVING THE EYE CUP ASSEMBLY]
1 Two tapping
screws (B1.7)
2-8
6 CCD/CD block assembly
Never remove the CCD imager
(IC101) from the CD-234 board
because position alignment
between the CCD imager and
the CD-234 board is difficult.
5 Two tapping
screws (B1.7 × 6)

5 Eye cup assembly

4 VF spacer
3 VF window
2