Setting A Programme; Starting A Programme - Electrolux EWT1276EOW User Manual

14 www.electrolux.com
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
10.5 Activating the appliance
Press the
deactivate the appliance. A tune sounds
when the appliance is activated.

10.6 Setting a programme

1. Turn the programme knob and set the
programme:
• The related programme indicator
• The indicator of the
• The display shows the level of the
2. If necessary, change the temperature,
the spin speed, the cycle duration or
add available options. When you
activate an option, the indicator of the
set option comes on.

10.7 Starting a programme

without the delay start
Press
• The indicator of
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
button to activate or
comes on.
Time Manager, the programme
duration and the indicators of the
programme phases.
If you set something
incorrect, the display shows
the message
.
and stays on.
CLICK
4.
flashes.
10.8 Starting a programme with
the delay start
1. Press
.
The related indicator comes on the
display.
2. Press
stops to flash
• The indicator
the display.
• The programme starts, the lid
locks, the display shows the
indicator .
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
display shows the delay you want to
set.
:
• The appliance starts the
countdown.
B
starts to flash on