Setting A Programme - Electrolux WASL 3T201 User Manual

18 www.electrolux.com
10.5 Liquid or powder detergent
1.
3.
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.

10.6 Setting a programme

1. Turn the programme knob. The
related programme indicator comes
on.
The indicator of button Start/Pause -
Départ/Pause flashes with red colour.
The display shows the default
temperature, the spin speed and the
empty indicator bars of the available
functions.
2. To change the temperature and/or
the spin speed, press the related
buttons.
3. Set the available functions.
CLICK
CLICK
2.
4.
10.7 Starting a programme
without the delay start
Press button Start/Pause - Départ/Pause
to start the programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
The drain pump can operate
for a short time when the
appliance fills water.
A
B
.