Philips RQ1145 User Manual page 17

- A goatee
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (specific types only).
- The best and most hygienic way to clean the shaver is in the Jet Clean
System (specific types only). You can also rinse the shaver under the tap
or clean it with the brush supplied.
- Clean the shaver after every shave for optimal shaving performance.
- You can clean the outside of the shaver with a damp cloth.
- Regular cleaning guarantees better shaving performance.
Cleaning the shaving unit
Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
1 Switch off the shaver. Remove it from the charger or remove it from
the Jet Clean System (specific types only).
2 Rinse the shaving unit under a hot tap for some time.
Note: You can also clean the shaving unit with the cleaning brush supplied.
3 Pull the shaving head holder off the bottom part of the shaving unit
and rinse it under a hot tap for 30 seconds.
Note: You can also clean the shaving head holder with the cleaning brush
supplied.
4 Carefully shake off excess water and let the shaving head holder dry.
Never dry the shaving unit with a towel or tissue, as this may damage the
shaving heads.
5 Reattach the shaving head holder to the bottom part of the shaving
unit ('click').
English
17