Clarion FB275BT Owner's Manual page 27

Common Operations
"ADD DEV."
t
"EDIT DEV."
t
"DEL. DEV."
t
"AUTO CONN"
t
"MIC"
O-®·
Push or turn the
[~/II
• ENT] knob de-
pends on selected item.
• Adding a new device (Pairing mode)
1. Select "ADD DEV.".
2. Push the
[~/II
• ENT] knob.
*
The"
0 "
indicator will be blinking. The display
shows "Pairing..." and the car stereo is currently
in Pairing mode.
Note:
• The pairing timeout is 3 minutes.
• Editing a device name
1. Select "EDIT DEV.".
2. Push the
[~/II
• ENT] knob.
*
The display shows the device name.
[DEI..r::-T~AtI1E "~~l
PHONE-\
Device name
3. Turn the [
~/II
• ENT] knob to edit a char-
acter.
4. Press the
[~]
button or push
[~/II
• ENT]
knob to go to next character. Press the
[~]
button to return to previous character.
5. Push the
[~/II
. ENT] knob at the last blank
character to store the name.
Notes:
• Push and hold the [
~/II
• ENT ] knob for 1.5
seconds or longer at any position will store the
name as well.
• If there is no device connected, "(no devices)" will
be shown in the display.
• Deleting a device
1. Select "DEL. DEV.".
2. Push the
[~/II
• ENT] knob.
3. Turn the
[~/II
• ENT] knob to select a device
to be deleted.
4. Push the
[~/II
• ENT] knob. A delete con-
firmation is prompted.
5. Turn the
[~/II
• ENT] knob to select "YES"
or "NO".
6. Push the
[~/II
• ENT] knob to confirm the
selection.
Notes:
• If there is no device connected, "(no devices)" will
be shown in the display.
• "All" option will be available if there is more than
one device connected.
• Deleting pairing information in the main unit only
stops the unit from being connect to the other de-
vice. It does not stop the other device from trying
to connect to main unit. Please delete the pairing
information of the main unit from the phone/device
as well. Always make sure pairing information on
both device and main unit have been deleted before
starting a new pairing activity.
• Deleting a device will disconnect any current
Bluetooth® connection. User will need to manually
re-connect if necessary.
• Automatic connection
This function allows the unit to be connected au-
tomatically with previously connected device dur-
ing power up or entering Telephone mode. The
Bluetooth® wireless function in your phone has to
be turned on to establish automatic connection.
1. Select "AUTO CONN".
2. Turn the [
~/II
• ENT ] knob to select "ON"
or "OFF".
• ON : Auto connection enabled.
• OFF : Auto connection disabled.
Notes:
• The factory default setting is "OFF".
• Please enable this feature only if your phone is
supported.
FB275BT I FB275BTB
27
Common Operations
"ADD DEV."
t
"EDIT DEV."
t
"DEL. DEV."
t
"AUTO CONN"
t
"MIC"
O-®·
Push or turn the
[~/II
• ENT] knob de-
pends on selected item.
• Adding a new device (Pairing mode)
1. Select "ADD DEV.".
2. Push the
[~/II
• ENT] knob.
*
The"
0 "
indicator will be blinking. The display
shows "Pairing..." and the car stereo is currently
in Pairing mode.
Note:
• The pairing timeout is 3 minutes.
• Editing a device name
1. Select "EDIT DEV.".
2. Push the
[~/II
• ENT] knob.
*
The display shows the device name.
[DEI..r::-T~AtI1E "~~l
PHONE-\
Device name
3. Turn the [
~/II
• ENT] knob to edit a char-
acter.
4. Press the
[~]
button or push
[~/II
• ENT]
knob to go to next character. Press the
[~]
button to return to previous character.
5. Push the
[~/II
. ENT] knob at the last blank
character to store the name.
Notes:
• Push and hold the [
~/II
• ENT ] knob for 1.5
seconds or longer at any position will store the
name as well.
• If there is no device connected, "(no devices)" will
be shown in the display.
• Deleting a device
1. Select "DEL. DEV.".
2. Push the
[~/II
• ENT] knob.
3. Turn the
[~/II
• ENT] knob to select a device
to be deleted.
4. Push the
[~/II
• ENT] knob. A delete con-
firmation is prompted.
5. Turn the
[~/II
• ENT] knob to select "YES"
or "NO".
6. Push the
[~/II
• ENT] knob to confirm the
selection.
Notes:
• If there is no device connected, "(no devices)" will
be shown in the display.
• "All" option will be available if there is more than
one device connected.
• Deleting pairing information in the main unit only
stops the unit from being connect to the other de-
vice. It does not stop the other device from trying
to connect to main unit. Please delete the pairing
information of the main unit from the phone/device
as well. Always make sure pairing information on
both device and main unit have been deleted before
starting a new pairing activity.
• Deleting a device will disconnect any current
Bluetooth® connection. User will need to manually
re-connect if necessary.
• Automatic connection
This function allows the unit to be connected au-
tomatically with previously connected device dur-
ing power up or entering Telephone mode. The
Bluetooth® wireless function in your phone has to
be turned on to establish automatic connection.
1. Select "AUTO CONN".
2. Turn the [
~/II
• ENT ] knob to select "ON"
or "OFF".
• ON : Auto connection enabled.
• OFF : Auto connection disabled.
Notes:
• The factory default setting is "OFF".
• Please enable this feature only if your phone is
supported.
FB275BT I FB275BTB
27