Pioneer DV-444 Operating Instructions Manual page 13

#
ANGLE button
Some DVDs are recorded with various camera angle
playback options. Press ANGLE
display different camera angles (page 35).
$
DISPLAY button
Press during playback to display statistical disc
information. Press repeatedly to display different
information (page 55).
%
TOP MENU button*
Press to call up the top menu programmed on the
DVD. Depending on the DVD, the top menu may be
identical to the DVD menu (page 21).
^
RETURN button*
Use to go one menu back (current settings are
maintained). Use RETURN
want to change the option setting in a menu.
&
Cursor buttons (2/3/5/∞)*
Use to move through the options on menu screens
and to change settings.
*
ENTER button*
Use to implement settings selected with the cursor
buttons or to set items highlighted in a menu.
(
NEXT ¢ button
During playback, press NEXT ¢ to advance to the
next chapter/track (page 22).
)
PAUSE 8 button
Press to pause playback of a disc. Press again to
resume playback (page 41).
_
REV 1/FWD ¡ (fast reverse/forward)
buttons
During playback of DVD and Video CD, press
FWD ¡ to perform fast forward scanning. Press
REV 1 to perform fast reverse scanning of DVD
and Video CD. When a CD or MP3 is loaded, audio
scanning is performed (page 22).
+
CLEAR button
Works in conjunction with a number of player
functions. Use to cancel repeat and random
playback, and to edit programs.
¡
REPEAT button
Use to set the repeat mode (page 44).
™
REPEAT A-B button
Press at the beginning and end of the section you
want to repeat or to mark a location you want to
return to (page 44).
£
SEARCH MODE button
Press to perform a title/folder, chapter/track or
elapsed time search (page 42).
repeatedly to
when you do not
¢
TV CONTROL buttons
TV FUNC: Press TV FUNC to select the TV for
remote control operation.
TV: Press TV to turn the TV's power on or
put in standby.
CHANNEL: Use to select TV channel.
VOLUME: Use to adjust the volume.
1. Input the maker code.
While holiding down the CLEAR button, input the
two digit code from the table below that
corresponds to the make of your TV.
For example, If you have a Pioneer TV, press and
hold CLEAR, then press 0, 0 on the remote
control.
2. Confirm that the TV is responding to the
programmed code.
On the remote, press the
swithches on (or into standby if it was on
previously), then you have the correct code.
If nothing happens when you press the
button, start again from step 1 using a different
code.
• Some makers have several codes. Try each one
until you find the one that works.
Preset Code List
Code Manufacturer
00 PIONEER 1
01 RCA 1
02 SHARP 3
03 ZENITH 1
04 SONY
05 TOSHIBA 1
06 HITACHI 1
07 PHILIPS
08 PANASONIC 1
09 MITSUBISHI
10 GOLDSTAR 1
11 GE 1
12 MAGNAVOX 1
13 JVC 1
14 SANYO 2
15 RCA 2
16 RCA 3
17 RCA 4
TV button. If the TV
TV
Code Manufacturer
18 RCA 5
19 SHARP 1
20 ZENITH 2
21 SANYO 1
22 PANASONIC 2
23 GOLDSTAR 2
24 HITACHI 2
25 HITACHI 3
26 TOSHIBA 2
27 SHARP 2
28 GE 2
29 MAGNAVOX 2
30 TOSHIBA 3
31 HITACHI 4
32 JVC 2
33 FUJITSU
34 PIONEER 2
35 GRANDIENTE
13
En