Input Search - Panasonic th-49lf8w Operating Instructions Manual

Input search

When a signal is not detected, another input with a
signal is automatically selected.
Select the item with
Select the set point with
Input search
Input search Custom
1st search input
2nd search input
[Input search]
[Off]:
When there is no signal, the input is not switched
automatically.
[All inputs]:
Searches all inputs and switches to an input with a
signal.
Input search is executed in the following order.
(Example) When the current input is [HDMI1]
[HDMI2] → [DIGITAL LINK]* → · · · · · · · · · →
[USB] → [HDMI1]
: LF80 series only
*
Note
●
The inputs set to [(Skip)] in [Input label] (page
47) are skipped when searching.
[Custom]:
Repeatedly searches [Current input], [1st search
input] and [2nd search input] in order, and switches
to an input with a signal.
PC
16:9
Searching...
[Searching...] is displayed during the input search.
[1st search input], [2nd search input]
Set the input to search when [Custom] is selected.
[HDMI1] / [HDMI2] / [DIGITAL LINK]*
[PC] / [COMPONENT]*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 44)
.
.
(None)
(None)
/ [DVI-D] /
1
/ [VIDEO] / [USB] / (None)
2
Note
● This menu will be greyed out and cannot be set
under the following conditions.
[Input lock] is not set to [Off]. (see page 64)
•
[Failover/Failback] - [Input change mode] is not
•
set to [Off]. (see page 60)
●
If the input is changed by this function, the last input
is selected when the power is turned on next ime.
If you wish to retain the original input when the
power is turned on, set [Ini ial input] to the original
input. (see page 63)
59
English