Carriage Belt Tension Adjustment - Epson TM-U220 Series Service Manual

Confidential

Carriage Belt Tension Adjustment

1. Loosen the screw of the plate, belt tension assembly, hook the end of the tension gauge to the
hole of the plate, belt tension assembly, adjust the tension properly, and tighten with the
screw.
2. Check the belt tension.
Note:
Make sure the plate, belt tension is stable when loosening the screw tightening the plate, belt tension while
pulling the carriage belt with the tension gauge by 7.35N.
3. Tighten the plate, belt tension assembly with the screw
Tension gauge
5-6 Adjustment and Setting
Hook the end of the tension gauge and adjust the tension
Rev. A