Storage; Maintenance; Shock - Stamina 40-0041GG Owner's Manual

STORAGE

1. To store the Mini Stepper, simply keep it in a clean dry place.
2. The minimum dimensions of the Mini Stepper are approximately 15.3 inches long x 12 inches wide x
6.6 inches tall. These dimensions will vary. Please measure your Mini Stepper if exact dimensions are
needed.
3. Grasp the Front and Rear Stabilizers to move the Mini Stepper. Do not use the PEDAL ARMS(10, 14)
to move the Mini Stepper.

MAINTENANCE

The safety and integrity designed into the Mini Stepper can only be maintained when the Mini Stepper
is regularly examined for damage and wear. Special attention should be given to the following:
1. Verify that the SHOCKS(26) provide resistance by pushing down on the foot pedals.
2. SHOCKS(26) on steppers get HOT during use. To avoid burns, do not touch the SHOCKS(26) until they
have time to cool.
3. Verify that the CAUTION LABEL(28) is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the CAUTION LABEL(28) is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the Mini Stepper removed from service
until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the Mini Stepper.
7. Keep your Mini Stepper clean by wiping it off with an absorbent cloth after use.
9