Clock And Timer - GE JCS968 Owner's Manual

Using the oven controls.
(Throughout this manual, features and appearance may vary from your model.)
OVEN • FOUR
CONVECTION
BAKE
CUIRE
MULTI/1GRILLE
AUTO RECIPE CONVERSION
CONVERSION DE RECETTES
BROIL
GRIL
HI/LO
PROOF
FERMENTATION RÉCHAUD
Features and appearance may vary.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Touch to select the bake function.
BROIL HI/LO Pad
Touch to select the broil function.
CONVECTION BAKE MULTI/1 GRILLE Pad
Touch to select baking with the convection
function.
CONVECTION ROAST Pad
Touch to select roasting with the
convection function.
PROOF Pad
Touch to select a warm environment useful
for rising yeast-leavened products.
START Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
If "F– and a number or letter" flash in the display and
the oven control signals, this indicates a function
error code. Touch the OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the oven and
call for service.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage.
CLEAN LOW/STD Pad
Touch to select self-cleaning function. See
10
the Using the self-cleaning oven section.
ROAST
ˆ
ROTIR
BAKE
CUIRE
WARMING
1 2
ZONE
RÉCHAUD
WARM
SET/OFF WARMING ZONE RÉCHAUD
6 7
PROBE
SONDE
START
3 4 5
DÉPART
CONTROL LOCKOUT
8 9 0
OFF
ARRET ˆ
VERROUILLAGE CONTROLES ˆ
CANCEL/ANNULÉ
Light (
Touch to turn the oven light on or off.
START TIME Pad
Use along with COOK TIME or
CLEAN LOW/STD pads to set the oven
to start and stop automatically at a time
you set.
COOK TIME Pad
Touch and then touch the number pads to
set the amount of time you want your food
to cook. The oven will shut off when the
cooking time has run out.
OFF Pad
Touch to cancel ALL oven operations
except the clock and timer.
CLOCK Pad
Touch before setting the clock.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
TIMER Pad
Touch to select the timer feature.
PROBE Pad
Touch when using the probe to cook food.
WARM Pad
Touch to keep cooked foods warm. See the
How to Set the Oven for Warming section.
WARMING ZONE Pad
Touch this pad when using the center
surface unit to keep food warm until ready
to serve.
TIME • TEMPS
COOK TIME START TIME
TEMPS DE
HEURE DE
CUISSON
DÉPART
TIMER CLOCK
MINUTERIE HORLOGE
CLEAN
NETTOYAGE
LOW/STD
) Pad