Clock And Timer - GE EML27 Owner's Manual

Using the clock and timer.
Not all features are on all models.
12
9 3
6
Not all features are on all models.
Make sure the clock is set to the
correct time of day.
Clock (on some models)
The clock on your range is powered by the
range itself. No batteries are necessary. The
time is displayed with no timer or audible alarm.
To set the clock, turn the stem left or right.
To clean the clock, see instructions on page 23.
For any repairs, call a qualified service
technician.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing functions
to work properly.
Touch the Clock pad twice.
Touch the + or – pads.
If the + or – pads are not touched within one
minute after Step 1, the display reverts to the
original setting. If this happens, repeat Step 1
and reenter the time of day.
To Turn Off the Clock Display
If you have several clocks in your kitchen, you
may wish to turn off the time of day clock
display on your range.
o T u h c t e h Clock pad once to turn off the
time of day display. Although you will not
be able to see it, the clock maintains the
correct time of day.
o T u h c t e h Clock pad twice to recall the
clock display.
Touch the Start/On pad until the time of
day shows in the display. This enters the
time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock pad. The time of day shows until another
pad is touched.
15