Alignment and Adjustment
10-b. B-Y NEGATIVE GAIN (outdoor)
1) Camera mode & 5100˚ K color bar chart
(3100°K color bar chart + C16 filter)
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "O89 XX XX".
4) Ensure that camera picks up image on 5100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the yellow level is 48IRE.
6) Press the START/STOP (Confirm) button to
store data.
7) The OSD shows "OK" after finishing the
adjustment.
11. R-Y POSITIVE HUE (indoor)
1) Camera mode & 3100˚ K color bar chart
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "172 XX XX".
4) Ensure that camera picks up image on 3100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the red vectors is 108˚ .
6) Press the START/STOP (Confirm) button to
store data.
7) The OSD shows "OK" after finishing the
adjustment.
4-22
11-b. R-Y POSITIVE HUE (outdoor)
1) Camera mode & 5100˚ K color bar chart
(3100°K color bar chart + C16 filter)
2) Connect a video output terminal to a vec-
torscope and a TV.
3) Press the FF(Mode Up)/REW(Mode Down)
button so that OSD shows "O6F XX XX".
4) Ensure that camera picks up image on 5100˚ K
color bar chart precisely and the illumination is
1500-2000 Lux.
48IRE
5) Press the PLAY (Data Up)/STOP (Data Down)
so that the red vectors is 108˚ .
6) Press the START/STOP (Confirm) button to
store data.
7) The OSD shows "OK" after finishing the
adjustment.
RED VECTOR
108 DEG
RED VECTOR
108 DEG
Samsung Electronics