Download Print this page

Advertisement

Quick Links

AutoCommand
Remote Control Car Starter Installation Manual
DesignTech International, Inc. • 7955 Cameron Brown Court • Springfield, Virginia 22153 USA • 703-866-2000 or 800-337-4468
Congratulations on your purchase of the AutoCommand
allows you to start the car by remote control from the comfort of your home or office in order to cool it down in the summer or
heat it up in the winter.
®
AutoCommand
is for automatic transmission cars only. It is an extremely sophisticated system with multiple built-in safety and
security features.
• Will start your car by remote control, and run the heater, defroster, or air conditioner to warm up or cool down the car.
• Is designed to start the car if it is in park, and only if the hood is closed.
• Can monitor the engine's speed using a special tachometer monitoring circuit, and will cut off the ignition if the car stalls.
• Will attempt to start the car for up to six seconds, but no longer (to avoid damage to the starter motor). Should the car
not start, or if it stalls after starting, the AutoCommand® will make two further attempts to start it.
• Will not let the car be driven without the key in the ignition.
• Shuts itself off automatically after 10 or 15 minutes (user option) if you forget to come out to your car.
• Will shut off if the brake pedal is pushed, the hood is opened, or the transmission is shifted out of park - unless the key is in
the ignition and in the "run" position.
• Allows you to remove the key while leaving the car running with the doors locked for up to 10 or 15 minutes utilizing the
QUICK STOP
TM
option.
• Starts the car automatically whenever the temperature drops below 0
voltage drops below 11 volts with the Cold Start option activated.
• Is quality engineered, microprocessor controlled, and made in the USA to provide many years of reliable use.
• Comes with a 2 year warranty.
Tools required to install the AutoCommand
Wire Cutters/Strippers
Testmeter
We highly recommend that all connections be soldered for reliability.
Auto Command Module
Control Harness (10 position)
6 Power & Ignition wires
Parts Kit in plastic baggy:
Alchohol
Pad
Alcohol Pad
WARNING
This car is equipped with a remote control starting device.
Disable before working on car!
AVERTISSEMENT
Co véhicule est équipé d'un systéme de démarrage á distance. Mettez-le hors
fonctuin avant d'eflectuer toule opération d'entretian ou de répanation!
On/Off Control Switch
Warning Label
2 Antenna Clips with Adhesive Pads
The AutoCommand
Soldering Iron
Screwdrivers
Parts List:
Transmitter
Antenna
30 A Fuse
Window Decal
Hood Pin Switch Set
Model 20023
®
®
Remote Car Starter. The AutoCommand
®
Remote Car Starter:
o
®
Unit:
Pliers
Drill
Ring Terminal
2 Cable Ties
®
F (-18
o
C), rises above 140

Wiring Diagram

Power Harness
Color
Function
Pink
Power(+12V)
White
Accessory
Yellow
Starter
Blue
IGN1
Green
IGN2
Black
Ground
ON/OFF Switch Jack
Control Harness
Circuit
Color
Function
Type
White/Black
Ignition 3
(-) 400mA
Brown/White Alarm Disable
(-) 400mA
Brown
Accessory Pulse (-) 400 mA
Blue
Horn
(-) 400 mA
Yellow
Lights
(-) 400 mA
Left - Option
Right - Code Learn
White - Option
Red
LED
Color
Function
Type
Required
Orange
Brake
(+)
Input
Yes
Violet
Hood
(-)
Input
Yes
(-)
Green
Tach
Input
No
(-)
Red/White
Remote
Input
No
Red/Black
Control Switch Input
No
Yes
(Not Used)
V 7.1
Remote Car Starter system
o
F (78
o
C), or if the battery
Circuit
Type
Required
Input
Yes
Relayed output
Yes
Relayed output
Yes
Relayed output
Yes
Relayed output
Maybe
Input
Yes
Coax
Required
Antenna Jack
No
No
No
No
No

Advertisement

loading

Summary of Contents for AutoCommand 20023

  • Page 1: Wiring Diagram

    • Will attempt to start the car for up to six seconds, but no longer (to avoid damage to the starter motor). Should the car not start, or if it stalls after starting, the AutoCommand® will make two further attempts to start it.
  • Page 2 The AutoCommand requires the installer to press and hold the brake pedal. Note that if the unit is not initialized then the AutoCommand will power up Ignition Key Diagram for Steps 4-7 the ignition wire when the brake is depressed. If the ignition does not come The vehicle’s wires are found coming off of the key switch.
  • Page 3 This method starts the car by reading the engine speed (tach) The RED/WHITE wire which is optional, can be used to trigger the AutoCommand ® information from a wire under the hood. If you choose tachometer sensing, to start from a source other than DesignTech’s remote control transmitter.
  • Page 4 Again - Stop the car When finished -- switch the Control Switch back ON. The LED will flash once. Important Note: Make sure that all drivers who will be operating the AutoCommand ® are fully aware of the safety precautions installed and their limitations. Stress the impor- SPECIAL CASES tance of switching the On/Off control switch to the “OFF”...