Model Development - AER acoustiCube 3 Operating Instructions Manual

acoustiCube 3

5. Model Development

From 1992 Acousticube Prototype
From 1992 Acousticube I with ALESIS effect board
(16 effects)
1994 Revised model with 48V phantom power
from 12/1995 Change to Japan-FX-Board (ME-2)
with 16 effects
From 09/1996 AER Acousticube II with Japan-FX-Board
(ME-2/ME-32) New features: 100 effect
Three band tone controls
Connection for an active subwoofer
New power amplifier with output for an ad-
ditional passive Box (SUB10)
From 04/1998 AER Acousticube IIa with Japan-FX-Board
(ME-32)
New features: Balanced piezo input stage
100 effects, two with memory function and
switchable via AER footswitch
Mute/ master control function via pedal-
connection on AER footswitch
From 12/1998 New speaker system Beyma 8"BX/L
New power amplifier with two-step limiter
2000 New outfit with WB-spatter lacquer
From 04/2000 Revised effect chart: corrected assignment,
selectable phaser and combined effects
From 03/2002 AER Acousticube IIa with DSP3-FX-Board
(AER processing)
New features: Improvement of the effect
section's audio quality
From 02/2003 Revised DSP3-firmware with combined
effects and further improved audio quality
From 07/2004 acoustiCube 3
-10-
C