Serial No. Replacement; How To Remove Connectors And Lead Wires - Canon EOS DIGITAL REBEL XTI Service Manual

Repair Information
1.6 Serial No. Replacement
Serial No. on the body number label (CY3-1565(S)/CY3-1566(B)) is used for various
information such
as service information after the product release. In particular, when the
label is replaced with the service part, the classification number (forth and fifth digit of the
serial number) is not reflected. Therfore, be sure to copy them to the surface ofTFr holder
unit base inside the camera.
Fig. 028 Fig. 029 Fig. 030
1.7 How to Remove Connectors and Lead Wires
Make sure that front side of the connector is up, and then push to attach the connector
until you hear a snapping sound. Deformed grooves may cause some damage in the
connector.
Fig. 031 Fig. 032
Fig. 033 Fig. 034
9