Table of Contents
Advertisement
System detection and alerts
The system will trigger the alert for
vehicles that enter the blind spot zone
from the rear or merge from the side.
Vehicles that you pass, or vehicles that
enter the blind spot zone from the front,
will only trigger the alert after the vehicle
has remained in the blind spot zone for a
short period of time.
Note: Vehicles that pass through the
blind zone quickly (typically less than 2
seconds) will not trigger the alert.
The system consists of two radar sensors
each located behind the rear wheels
hidden behind the bumpers.
CAUTIONS
Do not place items such as bumper
stickers in this area.
Repairs to these areas using body
filler will affect the performance of the
system.
E124741
Detection limitations
There may be certain instances where
vehicles entering and exiting the blind spot
zones may not be detected.
Windows and mirrors
78
Instances which may cause
non-detection:
•
Debris build up on the rear bumper
panels in the area of the sensors.
•
Certain manoeuvring of vehicles
entering and exiting the blind zone.
•
Vehicles passing through the blind
zone at high speed.
•
Severe weather conditions.
•
Several vehicles passing through the
blind zone following each other
closely.
False alerts
Note: False alerts are temporary and will
self correct.
There may be certain instances when the
system will alert with no vehicle present
in the blind zone.
Circumstances where false alerts may
occur:
•
Road guardrails.
•
Motorway concrete walls.
•
Construction areas.
•
Sharp turns around a building.
•
Bushes and trees.
•
Coming to a stop with a vehicle
directly behind but very close.
Turning the system on and off
Note: The on or off position will remain
until manually changed.
You can turn the system on and off using
the information display. See
Information displays (page 86).
When you turn the system off no further
alerts will be received. The BLIS warning
indicator will illuminate. See Warning
lamps and indicators (page 82).
Advertisement
Table of Contents
