Table of Contents
Advertisement
E131363
Once active the system will show
detected lane markings as two columns
of solid dots.
The dots are colour coded as follows:
•
Green - The system is ready to warn
you if an unintentional lane departure
may occur.
•
Red - The vehicle is approaching or is
too close to the detected lane
boundary. Take immediate safe action
to reposition the vehicle.
•
Grey - Right or left-hand lane
boundary is suppressed. This may be
due to a number of factors, but most
commonly if the turn indicator for that
side has been activated or if the
camera is not tracking a lane marking.
Instances where a lane boundary may be
suppressed:
•
Lane markings on the road may not
be detected by the camera sensor.
•
The direction indicator for that side of
the vehicle is on.
•
During hard acceleration and braking,
or if direct steering is applied.
•
If ABS or Stability Control (ESP) is
active.
•
Narrow lane width.
Lane departure warning
If the dots turn red or a vibration is felt
through the steering wheel you must take
immediate and safe action to align the
vehicle and correct any unintended lane
drift.
177
Advertisement
Table of Contents
