Table of Contents
Advertisement
1. Insert a screwdriver as far as possible
into the slot on the side of the remote
control, push it towards the key blade
and remove the key blade.
E74384
2. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
3
E74385
3. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
4
E126280
Keys and remote controls
2
CAUTION
Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
4. Carefully prise out the battery with the
screwdriver.
5. Install a new battery (3V CR 2032) with
the + facing downwards.
6. Assemble the two halves of the
remote control.
7. Install the key blade.
Remote control without a
folding key blade
Type 1
1
E126152
1. Insert a screwdriver into the recess on
the back of the key and remove the
key blade.
35
Advertisement
Table of Contents
