Windsor Saber Cutter SC326 Operating Instructions Manual page 15

1. Key Switch
2. Battery Charge Level Indicator
3. Speed Control Knob
4. Propel Control Lever
5. Reverse Button
6. Brush Switch
7. Brush Lift Lever
8. Solution Control Knobs
9. Vacuum Switch
10. Squeegee Lift Lever
11. Squeegee Pitch Adjustment Knob
12. Squeegee Deflection Adjustment Knobs
13. Emergency Shut-Off Switch (Optional)
14. Parking Brake (Optional)
15. Hour Meter (Optional)
1. Key Switch
Controls the power for machine functions.
To turn machine on, rotate key clockwise.
To turn machine off, rotate key counterclockwise.
FOR SAFETY: Always remove the key when
machine is unattended or during service to
prevent unauthorized movement.
2. Battery Charge Level Indicator
Indicates the charge level of the batteries.
The meter display is divided into 10 vertical bars. Bar
illuminated on the far right indicate full charge. Bars
flashing near the left side indicate the batteries should
be recharged. Further operation of the machine could
damage the machine or the batteries.
When the machine is left overnight with less than a full
charge, the display may initially indicate a full charge. It
will also indicate a full charge if the batteries are
disconnected, then reconnected. After a few minutes
of operation the meter will give the correct charge level.
3. Speed Control Knob
Controls the speed of the machine.
To increase speed, rotate knob clockwise.
To decrease speed, rotate knob counterclockwise.
86400280 Operators Manual - Cutter 36V Standard
4. Propel Control Levers
Controls the machine direction, and scrub brushes and
solution flow.
To propel machine forward, squeeze either propel
lever.
The scrub brushes will not rotate and the solution will
not flow to scrub deck with the propel levers in neutral.
5. Reverse Button
Controls the reverse function.
To propel machine backward, push the reverse button
while squeezing either propel lever.
6. Brush Switch
Controls the scrub brush motors.
To turn scrub brushes on, press the bottom of the
switch. The brushes will not rotate with the propel
control levers in neutral.
To turn scrub brushes off, press the top of the switch.
Operations
15