Personal injury or water damage to the premises could result. ® INSTALLATION INSTRUCTIONS Models 8713, 8714 Complies with ASME A112.18.1M and CSA B125 MT149A THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER 9" SPOUT (MODEL 7400, 8713) 12" SPOUT (MODEL 8714) 7" NOMINAL OPEN POSITION CLIP...
Page 2
Installation 1. Apply pipe joint compound or thread seal tape on the supply threads. 2. Screw eccentric assembly on the supply threads. 3. With escutcheon nut and escutcheon on valve casting, thread eccentric assembly onto valve threads making sure seal is in place as illustrated. Tighten by using wrench on flats of eccentrric assembly. 4.
Page 3
Reassembly 1. With cartridge stem UP, insert cartridge with ears aligned front to back (illustra- tion 4). 2. Push the cartridge down by the ears (Illustration 5) until the top of the ears are flush with the top of the body. 3.
• If you are concerned about lead in your water, have your water tested by a certified laboratory in your area. Moen Incorporated 25300 Al Moen Drive, North Olmsted, OH 44070-8022, U.S.A. MT149A SEP 95 HELPLINE:...