Loading Cut Sheets - NEC Pinwriter P2000/P2X User Manual

22 Section 4
Paper Loading

LOADING CUT SHEETS

Follow these steps to load cut sheets.
NOTES: 1. Before loading cut sheets, "[None]" must be selected in the option setting
menu of the menu mode. See Section 3 for more information.
2. When setting a single cut sheet, position it at the center of the printer.
Set the paper selection lever to the rear position.
Open the top cover.
Set the paper thickness setting lever depending on the weight of the paper you
are using (see Section 2).
Slide the sheet guide backward.
Pull the sheet guide forward until it locks.
Turn on the printer power. (Make sure the carriage moves to the center of the
printer and the SELECT light is off.)
Close the toi cover.
Insert a sheet of paper into the insertion slot of the sheet guide, using the ruler
and paper guides to center it.
The paper is fed to the first print position and the printer will assume online
state automatically (the SELECT light will light).
The printer is now ready to receive &ta from your computer.