NEC Pinwriter P2000/P2X User Manual page 37

From the rear of the printer, insert continuous Papers by using the markings
embossed on the rear of the Printer cover.
Turn the Paper feed dial to pull up the Paper to the height of the tractors.
Set the Paper selection lever to the front position.
Open the left and right tractor covers.
Set the left tractor so that its feed pins ahgn with the holes on the left side of the
down.
Set the right tractor so that its feed pins ahgn with the holes on the right side of
the Paper. Close and leck the right tractor.
NOTE: Fit the Paper snugiy between the tractors but do not stretch the Paper feed holes.
Close the top cover, leaning it over the tractor.
Turn on the Printer power.
The Printer is now ready to receive print commands from your Computer.
NOTE: When the Printer is out of Paper during printing and the SELECT light is blinking,
insert continuous Papers and press MODE to resume printing.
Paper Loading 29