At Touch Tone Phone; Connect With The Answering System; Voice Menu; Remote Access Commands - AT&T 9353 User Manual

9353_book_1ATT 6/7/01
ANSWERING SYSTEM OPERATION

Connect with the Answering System

You can access many features of this system remotely from a touch tone
phone.
1
Dial your telephone number.
When the system answers, press #, then enter your
2
Remote Access Code (preset to 19). The system beeps twice.
3
Within two seconds, enter a remote command (see "Remote Access
Commands" on page 16).
Press * 0 to exit remote operation.
4

Voice Menu

The system has voice prompts to help you with remote operation. Press
* 5 to hear the menu while remotely connected to the answering system.

Remote Access Commands

Function:
Play messages in
a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
1:56 PM Page 15

AT TOUCH TONE PHONE

Command:
Press #, then the appropriate mailbox
number (1, 2, or 3). The system plays
new messages. If there are no new
messages, the system plays old messages.
Press # 4 while message is playing;
each press backs up another message.
Press # 6 while message is playing;
each press advances another message.
Press # 5.
Hang up.
Press # 9 while message is playing.
Press # 7; system plays announcement,
then beeps.
Press * 7; after beep, record
announcement, press # 5 to stop.
System plays back announcement.
15