Panasonic DMR-BWT850 Operating Instructions Manual page 18

Getting started
Settings
5
Set the Owner ID-Data Entry ("NAME",
"HOUSE NO" and "POSTCODE").
e.g.,
Owner ID-Data Entry
PIN 0000
NAME
HOUSE NO
POSTCODE
Select
Change PIN
RETURN
1 Select the item, then press [OK].
2 Select the character, then press [OK].
Repeat this step.
3 Press [BACK/RETURN
4 Repeat steps 1-3 to enter all data.
5 Press [BACK/RETURN
the Owner ID-Data Entry screen.
6
Enter the new PIN for parental control.
PIN Entry
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to "0000" by pressing "RETURN" when there is no
number input.
- -
RETURN
• The default PIN is "0000".
1 Enter the new 4-digit PIN with the number
buttons.
• Make a note of the PIN you have
decided on in case you forget it.
2 Press [OK].
7
Set "Quick Start" to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
For details, refer to "Quick Start". (
When "Easy Setting has been completed."
appears, Easy Setting is complete.
- Select "Yes" to set network settings.
- Select "No" to finish the Easy Setting.
18
SQT1119
].
] to exit from
- -
Number 0 9
79)
To stop partway
Press [BACK/RETURN
To restart setup ( 70, Auto Setup)
To display the Owner ID information on TV
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more than
5 seconds.
- "00 RET" is displayed on the front panel
display.
2 Repeatedly press [1] (right) on the remote
control until "01 OID" is displayed on the front
panel display.
3 Press [OK] on the remote control.
The PIN is not displayed.
To change PIN for parental control
Refer to "PIN Entry". (
To change the region for Channel Sorting
Refer to "Channel Sorting by Region". (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
].
80)
71)