Watch Dog Timer - Albatron PX865PEL-800 Instruction Manual

Hide thumbs Also See for PX865PEL-800:
Table of Contents

Advertisement

IDE Facilities:
Supports Ultra ATA 33, Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes
Supports IDE interface with CD-ROM
Supports high capacity hard disk drives
Supports installation of up to 4 drives, with separate IDE connections for Primary and
Secondary connectors
I/O facilities:
One multi-mode Parallel Port capable of supporting the following specifications:
1. Standard & Bi-direction Parallel Port
2. Enhanced Parallel Port (EPP)
3. Extended Capabilities Port (ECP)
Supports two serial ports, 16550 UART
Supports Infrared Data Transmission using IrDA
Supports PS/2 mouse and PS/2 keyboard
Supports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives
MIDI port compatible
Game port compatible
Serial ATA facilities:
Compatible with SATA Spec 1.0
Supports Serial ATA specification of 150 MB/sec transfers with CRC error-checking
BIOS:
Phoenix-Award™ BIOS
Supports APM1.2
Supports ACPI power management

Watch Dog Timer:

This mainboard contains a special feature called the "Watch Dog Timer" which is used to
detect when the system is unable to handle over-clocking configurations during the POST
stage. Once a problem is detected the system will reset the configurations and reboot the
system after five seconds.
4
PX865PEL-800

Advertisement

Table of Contents
loading

Table of Contents