2B. Settings; Display Settings - Sanyo Vero User Manual

2B. Settings

Display Settings (page 28)
Volume Settings (page 31)
Ringer Settings (page 32)
Messaging Settings (page 34)
Airplane Mode (page 36)
TTY Use With Sprint Service (page 36)
Using the Hearing Aid Device Compatibility Function
(page 38)
Phone Setup Options (page 38)
Security Settings (page 40)
28 2B. Settings

Display Settings

Changing the Screen Saver
You can set a screen saver to display while in standby
mode.
1.
Press > Settings > Display > Screensaver
2.
Select a screen saver option by pressing the
navigation key up or down, and select a screen
saver.
If you select Take New Picture
picture, and then press
Changing the Brightness
You can adjust the brightness on the main screen.
When Power Save Mode is on and Backlight Dim is set
to Always Dim, you cannot change this setting.
1. Press
> Settings > Display > Brightness
2.
Highlight a brightness level and press
.
, press to take a
(left softkey) to assign it.
OK
.
twice.