Turning Your Phone On And Off; Battery And Charger - Sanyo Vero User Manual

Turning Your Phone On and Off

Turning Your Phone On
Press .
Once your phone is on and finds a signal, it
automatically enters standby mode – the phone's idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after five
minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your
phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
except numbered keys.
Tip:
The Power Save feature conserves your battery power
when you are in an area where there is no signal.
Turning Your Phone Off
Press and hold for two seconds until you see
the powering-down animation on the display
screen.
Your screen remains blank while your phone is off
unless the battery is charging.

Battery and Charger

WARNING:
Use only Sprint-approved or Kyocera-approved
batteries and chargers with your phone. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They're also
available at
www.sprint.com
.
2A. Phone Basics 13