Battery Capacity; Removing The Battery - Sanyo Vero User Manual

Table of Contents

Advertisement

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion)
battery. It allows you to recharge your battery before it is
fully drained. The battery provides up to 5.2 hours of
continuous digital talk time.
For a quick check of your battery level, glance at the
battery charge indicator located in the upper right
corner of your phone's display screen. When there are
approximately five minutes of talk time left, the battery
icon (
) turns red and the phone sounds a warning
tone.
After an additional five minutes or so, the phone
sounds a warning tone three times and then turns off.
Note:
Long backlight settings, searching for service, vibrate
mode, browser use, and other variables may reduce
the battery's talk and standby times.
Tip:
Watch your phone's battery level indicator and charge the
battery before it runs out of power.
14
2A. Phone Basics
Installing the Battery
See "Setting Up Your Phone" on page 2.

Removing the Battery

1.
Make sure the power is off so that you don't lose
any stored numbers or messages.
2.
Press the release tab, and apply light pressure
while sliding the cover down.
3.
Lift the battery up and remove it from the phone.
WARNING:
Do not handle a damaged or leaking Li-Ion
battery as you can be burned.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents