Remote Operation - Panasonic KX-TGC212 Operating Instructions Manual

Key Operation
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
Calling back (Caller ID subscribers
only)
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Editing the number before calling back
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the phone
number is shown in the desired format
(page 27). a M
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is "111".
For assistance, please visit http://www.panasonic.com/help
TGC2xx(en_en)_1209_ver030.pdf
Important:
R To prevent unauthorized access to this
1
2
3
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 31.
R The entered remote access code is deleted.
Using the answering system
remotely
1
2
3
N
4
Voice guidance
n When the English voice guidance is
n When the Spanish voice guidance is
Note:
R If you do not press any dial keys within 10
31
Answering System
product, we recommend that you regularly
change the remote code.
MMENUN#306
Enter the desired 3-digit remote access
code.
MSAVEN a MOFFN
Dial your phone number from a
touch-tone phone.
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 32).
When finished, hang up.
selected
During remote operation, the unit's voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
selected
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 32).
seconds after a voice guidance prompt, the
unit disconnects your call.
31
2013/12/09 11:46:11