Ec-Declaration Of Conformity - McCulloch B40 B ELITE Operator's Manual

B40 B ELITE, B40 BT ELITE
Approved accessories
Centre hole in blades/cutters, Ø 25,4
mm
Output shaft thread M12
Grass blade/grass cutter
Saw blade
Trimmer head
Support cup

EC-declaration of conformity

(Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters McCULLOCH
B40 B ELITE, B40 BT ELITE with serial numbers dating from 2012 onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2009, EN ISO 11806-1:2011
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered:
B40 B ELTE, B40 BT ELITE - SEC/12/2361
Huskvarna, 21 December 2012
Bengt Frögelius, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Type
Grass blade 255-4 1" (Ø 255 4-teeth) 580 30 50-01
Grass blade 255-3 (Ø 255 3 teeth)
Saw blade 200-22 (ø 200-22 teeth)
P35
Fixed
Cutting attachment guard, Art. no.
580 30 50-01
581 33 84-01
580 30 50-01
-
English – 29