Selecting A Timekeeping Mode Digital Display Format; Shifting The Hands; Using The Crown - Casio 5470 Operation Manual

Selecting a Timekeeping
Mode Digital Display Format
In the Timekeeping Mode, you can use the
operation below to change the contents of the
digital displays.
Day of the week,
month, day p
D
p
Barometric pressure
D
graph
Hour, minute, second

Using the Crown

The watch's crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Crown
Loosen
Pulling Out and Pushing In the Crown
●
Pull out the crown before performing crown
operations. Do not pull the crown with too
much force.
Normal timekeeping
Pull out
Operation Guide 5470
Important!
To prevent loss of water resistance
●
and/or damage due to impact, be
sure to screw the crown in by rotating
it away from you as you push it in.
When pushing the crown back in,
●
D
take care not to apply too much
force.
Fast Forward/Fast Reverse
●
After pulling out the crown, rotating it quickly
in succession in either direction will start a fast
forward or fast reverse operation. While a fast
forward operation is in progress, quickly
rotating the crown in succession again will
increase the speed even further.
The fast reverse operation speed is fixed
●
and cannot be changed.
Stopping Fast Forward/Fast Reverse
●
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
If you do not perform any operation
●
for about two minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
The message [PUSH] will appear on
●
the display in the cases below. If that
happens, push the crown back in
and then pull it out again.
When the crown is pulled out while
ー
in a mode that does not support
crown operation
When you do not perform any
ー
operation for about two minutes
after pulling out the crown
Hand shift moves the hands out of the way for
easy viewing of display info.
1.
Screw in
2.

Shifting the Hands

While holding down (L), press (B).
All hands will move to 2 o'clock.
●
To return the hands to their normal
timekeeping positions, press (A), (B), (C),
or (D).
Note
This function can be used in any
●
mode.
Hand shift cannot be used while
ー
configuring the city code or the
summer time setting, or when
manually configuring time and
date settings.
Shifted hands will return to their
●
normal positions if no button
operation is performed within about
ten seconds after hands are shifted.
In the modes below, hands that are
●
blocking a digital display will
automatically move to 4 o'clock or 8
o'clock. The hands will return to their
normal positions after about three
seconds.
Altimeter Mode
ー
Barometer Mode
ー
Thermometer Mode
ー
2