Fuser Unit - Samsung SCX-483xFD Service Manual

3.3.10 Fuser unit

CAUTION
The temperature gets high in the vicinity of the fuser unit. When replacing it, you may get injured. Before
replacing it, make sure that fuser unit has cooled.
1. Open the Frame-Rear by pushing both green
points.
Frame-Rear Frame-Rear
2. Remove the Frame-Rear by releasing both
hooks.
Service Manual
SCX-483x/5x3x series
3. Disassembly and Reassembly
3. Remove the exit sensor holder after removing
2 screws.
4. Remove 4 screws.
CAUTION
When reassembling the fuser unit, do not forget to
tighten these screws.
5. Release the fuser unit.
3-19
Exit sensor holder Exit sensor holder
Samsung Electronics