Caller Id Operation; Call Waiting; Incoming Call History; Memory Match - AT&T 900 MHz User Manual

CALLER ID OPERATION

Unreviewed call
information
Phone in use
Call number
Caller's phone
number
Caller's
name

Call Waiting

If you have Call Waiting with Caller ID service, the screen will display
information about your Call Waiting call when you hear the call signal.
on the handset or F on the base to access the call.
Press
Press again to return to the original call.
NOTE: If you are using an extension phone
when you receive a Call Waiting signal, the
screen displays MULTIPLE PHONES IN USE:
NO DATA.

Incoming Call History

This telephone assigns each incoming call a number from 1 to 99. The
most recent call will have the highest number. When the call history is full,
the oldest call information is deleted to make room for new incoming call
information.

Memory Match

Names stored in memory will appear in your incoming Caller ID as you
stored them (not as the telephone company sends them).
38
Answering system message
Priority Call Ringer is off
L1 L2
Speakerphone/
Intercom
Battery status
indicator
Time
MULTIPLE PHONES
IN USE: NO DATA
Date