Configuring The Viewer - Viewer Menu; Layout Tab - Sony SNC-CH110 User Manual

Detection size
Specify the minimum detection size and maximum
detection size of motion detection. To specify the
detection size, you can either enter values or drag the
vertexes of the area.
The area size is measured in pixels.
• When you place the cursor on the area, the cursor
changes to a crossed arrow, which you can drag to
move to the minimum detection size area and
maximum detection size area.
• When you place the cursor on the vertex of the area,
the cursor changes to n. Drag and move the vertex
to adjust the detection size.
OK/Cancel
See "Buttons common to every menu" on page 23.
68
Configuring the Viewer — Viewer Menu
Configuring the Viewer
— Viewer Menu
Click Viewer in the Administrator menu to display the
Viewer menu.
Using this menu, you can select the viewer to use and
configure advanced settings.
The Viewer menu consists of two tabs: Layout and
HTML output.

Layout tab

Homepage
Set the viewer or homepage to be displayed at the time
of access.
ActiveX viewer: Displays the ActiveX viewer at time of
access.