Replacing The Wiper Blades - Mercedes-Benz 2015 SLK Operator's Manual

Table of Contents

Advertisement

Windshield wipers
118
Å Intermittent wipe, high (rain sensor
3
set to high sensitivity)
° Continuous wipe, slow
4
¯ Continuous wipe, fast
5
í Single wipe/î To wipe the wind-
B
shield using washer fluid
Switch on the ignition.
X
Turn the combination switch to the corre-
X
sponding position.
In the Ä or Å position, the appropriate
wiping frequency is set automatically accord-
ing to the intensity of the rain. In the Å
position, the rain sensor is more sensitive
than in the Ä position, causing the wind-
shield wipers to wipe more frequently.
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions, thereby causing an accident.

Replacing the wiper blades

Important safety notes
G
WARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could
be trapped by the wiper arm. There is a risk of
injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
! To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
! Never open the hood if a windshield wiper
arm has been folded away from the wind-
shield.
Never fold a windshield wiper arm without a
wiper blade back onto the windshield.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the windshield wiper arm without a wiper
blade and it falls onto the windshield, the
windshield may be damaged by the force of
the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
! Always position the windshield wiper
arms vertically before folding them away
from the windshield. By doing so, you will
avoid damage to the hood.
Replacing the wiper blades
Removing the wiper blades
Turn the SmartKey to position 1 or 2 in the
X
ignition lock (
page 139).
Y
Set the windshield wipers to position °.
X
When the wiper arms have reached a ver-
X
tical position, turn the SmartKey to position
0 and remove it from the ignition lock
(
page 139).
Y
Fold the windshield wiper arms away from
X
the windshield.
Press both release clips ;.
X
Fold wiper blade : in the direction of
X
arrow = away from wiper arm ?.
Remove wiper blade : in the direction of
X
arrow A.

Advertisement

Table of Contents
loading

Table of Contents