Table of Contents
Advertisement
When the specified tire pressure has been
X
reached, press on/off switch A to OFF, on
the tire inflation compressor.
The tire inflation compressor is switched
off.
Turn the SmartKey to position 0 in the igni-
X
tion lock.
If the tire pressure is higher than the speci-
X
fied pressure, press pressure release but-
ton ; until the correct tire pressure has
been reached.
Unscrew union nut : on the air hose from
X
the valve.
Screw the cap onto the valve of the col-
X
lapsible spare wheel again.
Removing an air hose
To remove the hose from the tire inflation
X
compressor, push down the rocker switch
on the hose connector and pull out the
hose.
Stow plug ? and the air hose in the lower
X
section of the blower housing.
Stow the tire inflation compressor in the
X
vehicle.
Emergency spare wheel
343
Z
Advertisement
Chapters
Table of Contents
