Oster 2600 Instruction Manual page 6

I N S E R T I N G / R E M O V I N G B E AT E R S
Before releasing the Beaters or Dough Hooks, switch off the Mixer and remove the
plug from the electrical outlet.
Push the Beaters or Dough Hooks into the slots on the underside of the mixers, until they click
into place. The two Dough Hooks have different plug shapes and must be pushed into
the correct slots. Inserting the wrong way would lead the dough to "move" upwards. One
of the Dough Hooks has an additional small ring near the collar on the shaft. This
Dough Hook will only fit in the slot for which it is intended.
This is identified by a
To remove the accessories, hold firmly with one hand, while pressing the Beater
Ejector Button (figure 3).
Before using your Hand Mixer for the first time, wash the Beaters in hot/ soapy water,
or the dishwasher. Rinse and dry.
Be sure the speed controls are in the "0" position and the unit is unplugged from an
electrical outlet. Plug cord into an electrical outlet. Insert Beaters as indicated above.
(figure 3)
symbol,
C O N N E C T I O N
5
&
D O U G H H O O K S