Table of Contents
Advertisement
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We suggest that you consult this
chart before contacting your dealer.
Images aren't projected on the screen.
Problem
Power isn't turned on.
Images aren't projected on the screen.
Images suddenly disappear.
EN-28
Cause and solution
Check the states of the indicators.
LAMP(Red)
POWER(Red)
Off
Off
Cancel blanking by pressing the BLANK button.
On rare occasion, the lamp fails to light up. In such cases, try to light the lamp
again.
Check that the cable connected to the external device isn't broken.
When an extension cord is being used, replace it with the supplied cable and check
whether images are projected correctly.
The air inlet or outlet grille may be blocked.
Remove the objects blocking the air inlet or outlet grille and carry out the
following.
1. Wait for the air inlet or outlet fan to stop (or wait for the LAMP indicator to go out.)
2. Unplug the power cord from the wall outlet.
3. Wait about 1 minute.
4. Plug the power cord into the wall outlet.
5. Press the POWER button.
Check that the battery or power cord connected with the projector correctly.
Charge(Red) S o l u t i o n
Off
Connect the power cord to the projector.
Plug the power cord into a wall outlet.
Advertisement
Table of Contents
