Using the remote control
Operational range of the remote control
Front of projector
30°
30°
Operate the remote
control within a distance
of 10 m (30 feet) from the
projector, pointing the
IR beam at the remote
control photo-sensor
(front or rear) of the
projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Rear of projector
30°
30°
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
20°
10°
20°
20°
EN-9
•
Keep the remote control photo-sensor out of direct
sunlight or fl uorescent lamp light.
•
Keep the remote control photo-sensor at least 2 m
(6 feet) away from fl uorescent lamps. Otherwise,
the remote control may malfunction.
•
If there is an inverter-operated fl uorescent lamp
near the remote control, the remote control
operation may become unstable.
•
When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
20°
10°
20°
20°