Mitsubishi Electric HC4900 User Manual page 14

Viewing video images (continued)
Connecting to a video player, etc.
DVI-D(HDCP) IN
COMPUTER IN/
P B / COMPONENT
C B
VIDEO IN
VIDEO IN
TRIGGER
P R /
C R
S-VIDEO
IN
COMPONENT
VIDEO IN
S-video cable (option)
1 To S-VIDEO
IN terminal
HDMI IN
DVI-D(HDCP) IN
COMPUTER IN/
P B / COMPONENT
C B
VIDEO IN
VIDEO IN
TRIGGER
P R /
C R
S-VIDEO
IN
COMPONENT
VIDEO IN
• Also read the instruction manual of the equipment to be connected.
• Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL
may appear on the screen when you change the channel via any channel that is not being received. In such a case,
set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip
function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player or HDTV decoder
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use
the COMPONENT VIDEO IN terminals.
P /C P
R R
DVD player or HDTV decoder
• The terminal's names Y, P
• The terminal's names vary depending on the connected devices.
• Images may not be projected correctly depending on the type of the DVD player you use.
• Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
• When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL
menu.
Video player, or the like
2
To video output
terminal
To VIDEO
1
IN terminal
Video cable (option)
Video player, or the like
To S-video
2
output terminal
SERIAL
AC IN
Component cable (option)
P
/C Y
B B
, and P are given as examples of when a HDTV decoder is connected.
B R
1. Connect one end of the optional video cable to the VIDEO
IN terminal of the projector.
2. Connect the other end of the video cable to the video
output terminal of the video equipment.
When the video equipment is equipped with the S-video
output terminal, make the connection as follows:
1. Connect one end of the optional S-video cable to the
S-VIDEO IN terminal of the projector.
2. Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
Y
Y
DVI-D(HDCP) IN
COMPUTER IN/
P B / COMPONENT
C
B
VIDEO IN
VIDEO IN
TRIGGER
P R /
C
R
S-VIDEO
IN
COMPONENT
VIDEO IN
P /C
R R
/C
B B
EN-14
HDMI IN
SERIAL
AC IN