Setting The Current Altitude/Actual Altitude - VDO MC 2.0 WR Instruction Manual

DE ENG FR IT ES

6.9 Setting the current altitude/actual altitude

This area enables you to set the current altitude.
The current altitude is set if the air pressure has changed due to the
weather and the altitude shown on the display no longer corresponds
to the actual current altitude (e.g. the altitude details shown at the
summit).
There are two ways of setting the current altitude. Enter the current
altitude in meters/feet or the sea level pressure. On entering the sea
level pressure, the current altitude is calculated.
Details of the sea level pressure can be found on weather-pages in
Internet.
Process:
Press and hold for three seconds. SETTINGS--OPEN? flashes.
M
LANGUAGE---SELECT--- appears on the display.
Press ALTI A
Press M in confirmation.
58 MC 2.0 WR
NL PL
to scroll to ACTUAL ALTI--- SET ---.
VDO CYCLECOMPUTING
ACTUAL ALTI--ALTITUDE or AIR PRESSURE appears
on the display.
Press ALTI A
Press M in confirmation.
If ALTITUDe is selected:
ACTUAL ALTI--SET METER or FEET appears on the
display. The meter or feet number flashes.
Press ALTI A
it. Once you have set the correct value, press
confirm your setting.
ACTUAL ALTI––SET OK?
Press M in confirmation.
The MC 2.0 confirms by displaying ACTUAL ALTI--SET DONE.
or P to make a selection.
to reduce the value or to increase
P
M to