Setting The Tyre Size (Wheel-Circumference) - VDO MC 2.0 WR Instruction Manual

SPEED--KMH or MPH appears on the display.
Press ALTI A
Confirm the selection by pressing
ALTITUDE--METER or FEET is shown on the display.
Press ALTI A
Confirm the selection by pressing
TEMPERATURE--CELSIUS or FAHRENHEIT is shown
on the display.
Press ALTI A
Confirm the selection by pressing

6.3 Setting the tyre size (wheel-circumference)

This area is used to set the tyre circumference (tyre roll circumference).
The tyre circumference can be separately set for bike 1 and bike 2. The
tyre circumference can be manually entered in mm or automatically
determined from a table with tyre sizes.
or P to select KMH or MPH.
M .
or P to select METER or FEET.
M .
or P to select CELSIUS or FAHRENHEIT.
M .
Query, DIMENSION SET OK?
Press M to confirm the DIMENSION or
and change it.
The MC 2.0 confirms by displaying DIMENSION SET
DONE.
To exit settings mode, press and hold the
SETTINGS--CLOSE? flashes. The MC 2.0 switches back to function mode.
Process:
Press and hold M for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press to scroll to WHEEL SIZE---SET---.
P
Confirm the selection by pressing
www.vdocyclecomputing.com
PL NL ES IT FR
C to go back
C button for three seconds.
M .
MC 2.0 WR
ENG DE
>>> P05
51