Installing The Battery In The Computer; Inserting The Computer Into The Handlebar Bracket - VDO MC 2.0 WR Instruction Manual

5.2 Installing the battery in the computer

Your VDO computer comes without battery built in.
Before you start, please insert battery.
Step 1 Place the battery in the computer casing with the +terminal
pointing up.
Step 2 Make sure that the battery does not tilt.
Step 3 Ensure that the rubber seal lies flat on the battery
compartment lid.

5.3 Inserting the computer into the handlebar bracket

The VDO twist-click system securely connects the computer to the
handlebar bracket.
Step 1 Place the computer into the bracket in a 10 o'clock position.
Step 2 Twist the computer to the right until reaching the 12 o'clock
position and click it into the bracket system.
Step 4 Insert the battery compartment lid into the opening and use
a coin to turn it to the right as far as it will go (approx. ⅓ turn).
TIP for changing batteries: VDO recommends changing the battery
annually.
When the battery is changed, all settings and all trip totals are
saved.
Step 3 To remove the computer, twist it to the left
(do not push or pull).
How to remember: Rigid to the Right, Loose to the Left
www.vdocyclecomputing.com
PL NL ES IT FR
MC 2.0 WR
ENG DE
>>> P04
>>> P05
49