Bmc Network Configuration; Ipmi Lan Selection; Ipmi Network Link Status; Update Ipmi Lan Configuration - Supermicro X10SLH-LN6TF User Manual

X10SLH-LN6TF User's Manual

BMC Network Configuration


The following items will be displayed:

IPMI LAN Selection

This item displays the IPMI LAN setting. The default setting is Failover.

IPMI Network Link Status

This item displays the IPMI Network Link status. The default setting is Shared LAN.

Update IPMI LAN Configuration

Select Yes for the BIOS to implement all IP/MAC address changes at the next
system boot. The options are No and Yes

Configuration Address Source

Use this item to select the source of the IP address for this computer. If Static is
selected, you will need to know the IP address of this computer and enter it to the
system manually in the field. If DHCP is selected, the BIOS will search for a DHCP
(Dynamic Host Configuration Protocol) server in the network that is attached to
and request the next available IP address for this computer. The options are DHCP
and Static.
The following items are assigned IP addresses automatically if DHCP is selected,
or they can be configured manually if Static is selected.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
4-28