Memory Card Reader - Mitsubishi Electric TM WD-62827 Owner's Manual

Memory Card Reader and Front-Panel Inputs

Memory Card Reader

Figure 1
The memory card reader has four card slots that accept
a variety of popular memory card types. The reader
lets you view JPEG pictures from many digital cameras
and allows you to listen to MP3 or WMA audio
files recorded from computers or other digital
recording devices.
The card slots are designed for the specific types
of cards listed below. Other cards or objects
should not be inserted into the slots as this may
damage the TV. See the discussion of memory
cards in chapter 6 for details about JPEG, MP3
and WMA file types that are compatible with the
TV.
Card Compatibility
CARD 1
SmartMedia™
CARD 3
CompactFlash®
(Types I and II)
Microdrive®
Input 3 and IEEE 139 Input/Output
Figure 2
These jacks allow for convenient connection of audio/
video devices to the front of the TV.
Note that if you connect to the S-VIDEO terminal, the
VIDEO terminal is deactivated. The VIDEO terminal is
active only when there is no S-Video connection.
Use the IEEE 1394 input/output to connect IEEE 1394
devices, such as some camcorders. This connection
works the same as the rear IEEE 1394 connections.
Please refer to the NetCommand® information in
Chapter 3 for details.
Figure 1. Memory Card Reader
CARD 2
MultiMediaCard™
Secure Digital (SD)
CARD 4
Memory Stick PRO™
Memory Stick™
Figure 2. Input 3 and IEEE 1394 input/output on front panel
1
3
Lift cover to access
card reader and front
input jacks.
Chapter 1. Television Overview
2

13