Taking a Still picture
•
Set the drive mode to [
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
•
Aperture value and shutter speed are displayed. (It will
flash in red if the correct exposure is not achieved, except
when set to flash.)
•
When the image is correctly focused, the picture will
be taken, since the [Focus Priority]
initially to [ON].
3
Press the shutter button fully (push it in
further), and take the picture.
Basic
] by pressing 4(
(P167)
- 38 -
).
is set
3.5
3.5
3.5
60
60 60
AB