Panasonic Lumix DMC-G5X Basic Operating Instructions Manual page 125

[Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
To turn the LCD monitor on again, press any button or touch the LCD monitor.
•
Since [Economy] is cancelled when the eye sensor auto switching is performed, it is recommended
to use this mode with [LVF/LCD Auto] in [Eye Sensor]
•
[Sleep Mode] does not work in the following cases.
–
When using the AC adaptor (optional)
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
[USB Mode]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use to
prevent discharge of the battery.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto LCD Off]:
The LCD monitor is automatically turned off if the camera has not been
used for the time selected on the setting.
[30MIN.]/[5MIN.]/[2MIN.]/[1MIN.]
Select the USB communication system after or before connecting the
camera to your PC or your printer with the USB connection cable
(supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the camera to
a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Basic
(P170) set to [OFF].
- 73 -